Stop&Go
Stop&Go products are easy, resistant and 100% customizable.
Simple to install and manage, complete with everything.
All products are Made in Italy!
BIKE MAINTENANCE STAND
The Stop&Go stations are 100% customizable. They offer unique usability thanks to the careful study of each component carried out by a team of experts. Choose the best performing product below based on your needs.
"ST&GO" BIKE MAINTENANCE STAND
Equipped with bike tools and tyre pump with universal connector. MADE FROM anti-corrosion anodised aluminium. STAINLESS STEEL BOLTS. TOOL SET: 1 cross-head screwdriver; 1 flathead screwdriver; 1 adjustable spanner 0-22mm; 2 tyre levers; 1 x 15 mm spanner + 1 x 13 mm spanner; 1 set of Allen keys 2.5-10 mm. POSSIBILITY OF INSTALLING FROM 1 TO 4 SIDE BIKE RACKS TO PARK BICYCLES (USEFUL DURING TIRE INFLATION).
"ST&GO-PLUS" BIKE MAINTENANCE STAND PLUS
Equipped with bike tools attached with retractable cables and tyre pump with universal connector. MADE FROM anti-corrosion anodised aluminium.
STAINLESS STEEL BOLTS. TOOL SET:
1 cross-head screwdriver;
1 flathead screwdriver;
1 adjustable spanner 0-22mm;
2 tyre levers;
1 x 15 mm spanner + 1 x 13 mm spanner;
1 set of Allen keys 2.5-10 mm.
POSSIBILITY OF INSTALLING FROM 1 TO 4 SIDE BIKE RACKS TO PARK BICYCLES (USEFUL DURING TIRE INFLATION).
"P-ST&GO" BIKE PUMP STATION
Fitted with steel pump 8.0 bar/116 psi. MADE FROM anti-corrosion anodised aluminium. POSSIBILITY OF INSTALLING FROM 1 TO 4 SIDE BIKE RACKS TO PARK BICYCLES (USEFUL DURING TIRE INFLATION).
"M-ST&GO" WALL-MOUNTED MAINTENANCE UNIT
MADE FROM anti-corrosion anodised aluminium. Wall-mounted unit with bike tools. STAINLESS STEEL BOLTS. TOOL SET: 1 cross-head screwdriver; 1 flathead screwdriver; 1 adjustable spanner 0-22mm; 2 tyre levers; 1 x 15 mm spanner + 1 x 13 mm spanner; 1 set of Allen keys 2.5-10 mm.
"L-ST&GO" BIKE WASH BIKE WASH
Station specifically for washing bikes equipped with purpose-made brushes. The station is fitted with a quick universal water pump coupling and jet wash.
MADE FROM anti-corrosion anodised aluminium.
STAINLESS STEEL BOLTS. TOOL SET:
SET OF WASHING BRUSHES;
QUICK WATER PUMP COUPLING;
JET WASH.
POSSIBILITY OF INSTALLING FROM 1 TO 4 SIDE BIKE RACKS TO PARK BICYCLES (USEFUL DURING TIRE INFLATION).
"ST&GO-ACQUA" WATER PURIFICATION STAND
Public outdoor stand for purifying water. Ideal for CYCLE PATHS, PARKS, BIKE PARKING AREAS, FOOTPATH ACCESSES. MADE FROM anti-corrosion anodised aluminium. Natural activated carbon filtration. Anti-vandal selection push buttons.
BIKE MAINTENANCE STAND WITH E-BIKE CHARGING KIT
The Stop&Go stations are 100% customizable. They offer unique usability thanks to the careful study of each component carried out by a team of experts. Choose the best performing product below based on your needs.
"E-ST&GO" BIKE MAINTENANCE STAND WITH E-BIKE CHARGING KIT
Equipped with bike tools and tyre pump with universal connector, and with 2 Schuko E-Bike sockets. . MADE FROM anti-corrosion anodised aluminium. STAINLESS STEEL BOLTS. TOOL SET: 1 cross-head screwdriver; 1 flathead screwdriver; 1 adjustable spanner 0-22mm; 2 tyre levers; 1 x 15 mm spanner + 1 x 13 mm spanner; 1 set of Allen keys 2.5-10 mm. POSSIBILITY OF INSTALLING FROM 1 TO 4 SIDE BIKE RACKS TO PARK BICYCLES (USEFUL DURING BIKE CHARGING AND TIRE INFLATION).
"E-ST&GO-PLUS" BIKE MAINTENANCE STAND PLUS WITH E-BIKE CHARGING KIT
Equipped 2 x 230V Scuko E-Bike sockets, bike tools attached with retractable cables and tyre pump with universal connector. MADE FROM anti-corrosion anodised aluminium. STAINLESS STEEL BOLTS. TOOL SET: 1 cross-head screwdriver; 1 flathead screwdriver; 1 adjustable spanner 0-22mm; 2 tyre levers; 1 x 15 mm spanner + 1 x 13 mm spanner; 1 set of Allen keys 2.5-10 mm. POSSIBILITY OF INSTALLING FROM 1 TO 4 SIDE BIKE RACKS TO PARK BICYCLES (USEFUL DURING BIKE CHARGING AND TIRE INFLATION).
"E-P-ST&GO" BIKE PUMP STATION WITH E-BIKE CHARGING KIT
Equipped with steel bike pump 8 bar/116 psi. Equipped with 2 Schuko sockets for charging E-Bikes.
MADE FROM anti-corrosion anodised aluminium. POSSIBILITY OF INSTALLING FROM 1 TO 4 SIDE BIKE RACKS TO PARK BICYCLES (USEFUL DURING BIKE CHARGING AND TIRE INFLATION).
"S-E-ST&GO" E-BIKE CHARGING STATION WITH E-BIKE CHARGING KIT
Equipped with 4 Schuko sockets, 4 bike racks, light on top of station.
SMART STATION
INT-ST&GO
PAYMENT RECHARGE
SENSORS -
TOOLS
Maintenance tools and tyre inflation pump with universal connection and 2 Schuko sockets for charging E-Bikes. Payment management of the charging service both with our card and with the most common credit cards via smartphone. With people counting sensor and detector of the main air pm. Integrated QR-CODE for GEOLOCATION of the station during its installation.
PAY-ST&GO
PAYMENT RECHARGE
TOOLS
Maintenance tools and tire inflation pump with universal connection and 2 Schuko sockets for charging E-Bikes. On-board electronics that communicate with our APP to manage the blocking-unblocking of sockets in certain time slots and for the payment management of the charging service.. Integrated QR-CODE for the GEOLOCATION of the station during its installation.
SENS-ST&GO
PAYMENT RECHARGE
SENSORS
2 Schuko sockets for E-Bike charging. On-board electronics that communicate with our APP to manage the blocking-unblocking of sockets. People counting sensor and detector of the main air conditions. Equipped with a display for viewing (at the owner's discretion) the sensors collected data. Integrated QR-CODE for the GEOLOCATION service.
MODULABLE RACKS ALSO IN ELECTRIC VERSION FOR CHARGING E-BIKES
"RAS-M-6". 2.7 meter modular aluminum rack, combinable with our ST&GO columns with 6 vertical bike racks. Height 100.5 cm - Width 270 cm - Depth 50 cm - Weight 45 kg.
"E-RAS-M-6" E-BIKE GRID WITH 6 SCHUKO SOCKETS
Aluminium modular bike grid 2.7 metres, combines with our ST&GO bike station, with 6-bike upright rack and 6 Schuko sockets for charging e-bikes.
E-BIKE GRID WITH CHARGERS
Aluminium modular bike grid 2.7 metres, combines with our ST&GO bike station, with 6-bike upright rack and 6 integrated chargers of your choice for charging e-bikes. N.B.: each bike grid can be fitted with a maximum of 6 chargers.
"E-RAS-M-6-MIX" RASTRELLIERA ELETTRICA CON CARICATORI INTEGRATI E PRESE SCHUKO
Aluminium modular bike grid 2.7 metres, combines with our ST&GO bike station, with 6-bike upright rack, 3 Schuko sockets and 3 integrated chargers of your choice for charging e-bikes. N.B.: each bike grid can be fitted with a maximum of 6 chargers
TUBE SOLAR
Racks with solar panels for parking and charging E-bikes.
"TUBE S-A" STAND ALONE
Rack with solar panels for parking and charging E-bikes. STAND ALONE model, not connected to the grid, ideal for areas not covered by the electricity grid (shelters, mountain pastures, parks, cycle paths, etc.). Width 196 cm x depth 103 cm x H 107 cm
"TUBE S-R" PLUG IN - E-GRID
This system allows the electricity produced and not used by the solar panel for e-bikes to be reintroduced into the grid and used immediately for other domestic needs (without the possibility of accumulation). The average annual saving, considering a typical family of 4 elements that consumes approximately 2300 kWh/year, is approximately 470 kWh/year, equal to 20% of domestic electricity consumption. Width 196 cm x depth 103 cm x H 107 cm
"PENS-ST&GO" - SHELTER WITH PHOTOVOLTAIC PANELS
“STAND ALONE” SHELTER WITH PHOTOVOLTAIC PANELS FOR CHARGING E-BIKES
SHELTER WITH PHOTOVOLTAIC PANELS
Modular shelter with 2 solar panels of 435W (870 Watt total) stand alone, i.e. not connected to the electricity grid, equipped with a 2.3 Kw/h and 100Ah lithium storage battery. Thanks to the solar panels and storage batteries, up to 6 can be charged E-Bikes and/or scooters which must be parked in the appropriate bike racks located under the horizontal charging bar. The shelter can be customized with Bike Facilities accessories.
"CONTAINER-BF" - THE BIKE STATION BIKE FACILITIES
"CONTAINER-BF" - THE BIKE STATION BIKE FACILITIES
The containers used in the fabrication of the BIKE FACILITIES CONTAINER are sourced as either new or carefully selected, high-quality used units. These containers undergo through processing and modification to suit their new intended functions. Steel, chosen for its exceptional environmental credentials, is entirely GREEN, being 100% recyclable and enduring, with the capacity for near-infinite reuse. This significantly reduces reliance on polluting materials during its manufacturing process. Upon the pre-existing container, one or more access doors (on the long and/or short side, with vertical and/or horizontal opening) are meticulously crafted to serve as the entry points to the container.
Street furniture
Urban furniture products for the world of bicycles
"PB-TAND-ST&GO" DOUBLE-DECKER BIKE RACK
Galvanized tubular steel bike rack on 2 levels to park up to 8 bikes in a small space. Prepared for fixing to the ground. The removable guides are equipped with a lever system capable of lowering the support, and shaped supports for inserting the wheel that remain inside the bicycle even with the inclined support in order to lift and close the guide without the accidental risk of the vehicle falling from its seat. Furthermore, these supports allow you to secure the bike by means of a padlock or chain and guarantee its safety against possible theft. STANDARD COLOUR as in the photo: METAL. SPECIFICATIONS: 8 SPACES. HEIGHT WITH BIKES 200 cm. HEIGHT without bikes 135/150 cm. OVERALL WIDTH 190cm. OVERALL DEPTH 215 cm.
"BOX-ST&GO" MODULAR BIKE LOCKUP
Galvanized steel lockup for 1 bicycle. Fitted with lock (integrated key that can only be removed when the LOCKUP is closed) and hooks to secure the bike with a chain or padlock. The Lockup has holes to fix it to the ground with bolts and expansion plugs. STANDARD COLOUR as in the photo: supporting structure and central side panel in anthracite grey RAL 7016, side feature panels in opaque tangerine orange RAL 2000. SPECIFICATIONS: BIKE LOCKUP. OVERALL HEIGHT 120cm. OVERALL WIDTH 110cm. OVERALL LENGTH 220cm.
"PANC-ST&GO" STEEL AND WOOD BENCH WITH BIKE GRID
GALVANIZED steel and OKOUME wood (highly water repellent) bench with lateral slots for parking bikes. Provision for fixing to the ground. STANDARD COLOUR as in the photo: metal part rust, wooden slats light mahogany. SPECIFICATIONS: SEAT HEIGHT 46 cm. SEAT LENGTH 190 cm. TOTAL LENGTH 236 cm. WIDTH 43 cm.
"TAV-ST&GO" PICNIC TABLE
GALVANIZED steel and OKOUME wood (highly water repellent) picnic table with benches. The base of the legs have holes to fix the table to the ground with bolts and expansion plugs.
STANDARD COLOUR as in the photo: Metal part silver grey RAL 7001, wooden slats light mahogany. SPECIFICATIONS:
OVERALL HEIGHT 82 cm.
OVERALL WIDTH 190 cm.
OVERALL LENGTH 190 cm.
TABLE TOP LENGTH 143 cm.
BENCH LENGTH 163 cm.
Accessories
Accessories to customize your installations according to your needs
Base mob
Mobile base with wheels
Side bike rack
Side bike rack with 1 or 2 bike spaces
Extra electrical Sockets
2 extra electrical sockets
A Win-Win solution
Tourism
An extra gear for welcoming the biker guest, who perceives real attention towards the bike world.
A compact workstation, easily integrated into the spaces of the structure and customizable
to ensure maximum image consistency.
Public administration
A limited investment to underline the sporting character of the location, even in an urban context.
A structure that integrates perfectly with the surrounding environment.
A sustainable and inclusive solution: the charging point can also be used by disabled people in electric wheelchairs.